SKETCH-BASED GEOMETRY MODELING
In addition to direct Boolean based solid modeling, FEMAP v5.0 also offers sketch-based solid modeling, where profiles are created, and then extruded or revolved, either adding or removing material from a base solid.
Copyright ©
1998, 1999 Enterprise Software Products, Inc.
All Rights Reserved
Enterprise Software Products, Inc.
411 Eagleview Blvd., Suite 108
Exton, PA 19341 USA
Tel: +1 610 458 3660
Fax: +1 610 458 3665
Email: info@femap.com
